Ceramsite Panel provides very convenient conditions for concealed installation of various cables water pipes and electrical pipelines inside the partition wall. You can use a common portable electric grooving machine to cut shallow grooves on the panel surface very easily the operation process produces very little dust and the work speed is much faster than chiseling grooves on concrete or brick walls. Since the panel has a uniform internal structure of expanded clay and cement you will not encounter hard stone blocks or empty holes that often interrupt grooving work on traditional walls. After you place the cables or small diameter water pipes into the pre cut grooves you can fill the grooves with special lightweight filler and smooth the surface quickly. For larger diameter pipelines you can pre embed the pipeline position before installing the Ceramsite Panel or use a small electric hole saw to cut a neat opening on the panel. All these operations will not damage the overall structural strength of the panel at all. Many mechanical and electrical installation workers who have used Ceramsite Panel all agree that the concealed pipeline installation work on this panel is the most efficient experience they have ever had on any partition wall material.
